Ridder Drive Systems
T
+31 (0)341 416 854
F
+31 (0)341 416 611
I
www.ridder.com
18
The following conditions apply to programming an emergency position:
● End positions A and B must have been programmed (see §6.1).
● The minimum value of the control signal must be greater than 1 V DC.
6.2 Teaching in the LogicDrive RLD200 - Programming an emergency position
u
Description
Picture
1
Set DIP switch S1 to ‘Teach-in mode’.
2
Use button ‘DIR A’ or ‘DIR B’ to set the desired emergency
position C.
Pulse operation is also possible (see §5.2).
3
To save the emergency position C, press the programming
button ‘PROG’ (①). Release the button once both LEDs
(i.e. ‘LED A’ and ‘LED B’) start blinking alternately in quick
succession (②).
4
Set the DIP switch S1 to ‘Operating mode’.
5
The emergency position has now been programmed.
Summary of Contents for 507501
Page 28: ...www ridder com...
