Ridder Drive Systems
T
+31 (0)341 416 854
F
+31 (0)341 416 611
I
www.ridder.com
14
Hold to run
Operation
DIR A
To operate the unit in rotational direction A in
teach-in mode, press and hold down push button
‘DIR A’. If end position A has been programmed,
the RLD200 will stop at this position.
Hold to run
Operation
DIR B
To operate the unit in rotational direction B in
teach-in mode, press and hold down push button
‘DIR B’. If end position B has been programmed,
the RLD200 will stop at this position.
Pulse
Operation
DIR A
To activate pulse operation for rotational
direction A, first press and hold down control
button ‘DIR A’, then press the programming
button ‘PROG’, and then release both buttons.
Pulse operation can be stopped at any time
by pressing one of the control buttons. If end
position A has been programmed, the RLD200
will stop at this position.
Pulse
Operation
DIR B
To activate pulse operation for rotational
direction B, first press and hold down control
button ‘DIR B’, then press the programming
button ‘PROG’, and then release both buttons.
Pulse operation can be stopped at any time
by pressing one of the control buttons. If end
position B has been programmed, the RLD200
will stop at this position.
Stop pulse
operation
Pulse operation can be stopped at any time by
pressing one of the control buttons.
When operating the LogicDrive RLD200, do not exceed
the limit positions to avoid damage or injury!
Summary of Contents for 507501
Page 28: ...www ridder com...
