Ricoma Quick Start Guide
9
3.2.1: Adjust the protruding length of the blade top as required for specific cutting media.
3.2.2
(1)Loosen the screw of the blade holder.
(2)Place the blade into the blade holder attached to the carriage.
(3)When the blade is in the appropriate position, tighten the screw.
Correct
Loosen
Correct position for blade holder
Wrong: Blade out
too much
Wrong: Blade in
too much
Note:
There are two options to install cutting software, one is Signmaster, the other is CorelDRAW plugin (or
dongle).
3.3A Signmaster software installation (Recommended)
1. Open the Signmaster package, and insert the CD into your computer. Install and fill in the PSN code to
activate.
2. Change language if needed and then choose the cutting plotter model that corresponds to your cutter
in the Signmaster software.
3. Follow the Signmaster operation manual for more details and watch the informational video to learn
what a basic cut and contour cut are.
Contour cut: Please refer to your Signmaster software manual.
