Ricoh V-C3, Technical Training Manual

Page: 366 / 548

V-C3 Training
366
Slide 366
Lubricant Brush Roller Replacement
Apply Lubricant Powder - 3
"
5. Apply the mixture of powders as shown by the arrow.
"
6. At the same time, turn the gear so that lubricant is applied to the
whole surface of the roller.
!
IMPORTANT:
"
1. Use a brush to apply the powder if one is available. If a brush is
not available, use your finger.
"
2. Only use this mixed powder for the PCU lubricant brush roller of
the V-C2 or V-C3. Never apply this powder to another part or
another model.
"
3. Rotate the gear in the direction shown in the diagram.
V-C3 field service manual, Removal and Adjustment, PCU,
PCU Blades and Rollers, After Replacement
#
The slide shows how to apply the mixture of powders to the lubricant brush roller.
See the service manual for detailed instructions.