T
echnical
B
ulletin
PAGE: 8/8
Model:
High Capacity Stacker SK5030
Date:
7-Feb-18
No.:
RD776009
15. Rotate the "Gear" and locate the "Right Stay" on the bottom mark/line on the stacker.
16. Press the "Right Stay" downward, and confirm that the "Left Stay" is located between
the top and bottom mark/line on the stacker.
Note:
The "Left Stay" will be 0-5mm higher than the "Right Stay".
17. If the "Stays" are at the correct positions, tighten the screw on the "Tentioner".
IMPORTANT:
To adjust the height of the "Stays", adjust the "Timing Belt" to the
"Pulley".
18. Reattach the brackets, stay, and covers.
