20. Join the 2nd sorter to the relay unit and set the timing belt [A]. Then hook
the spring [B] of the tension pulley bracket.
21. Remove the front cover [C] of the horizontal transport unit (2 screws).
22. Install the harness cover bracket [D] (1 screw, M4 x 6) packed with the
2nd sorter to the relay unit.
23. Connect three of the five connectors [E] from the 2nd sorter.
24. Fix the ground line [F] from the 2nd sorter to the relay unit (M4 x 8 with a
star washer).
25. Pass the harness through the cutout of the bracket [D] and install the
bushing [G] packed with the 2nd sorter.
26. Install the front cover [C] of the relay unit (2 screws).
27. Install the front harness cover [H] and the front cover [I] of the horizontal
transport unit.
[A]
[B]
[E]
[C]
[H]
[D]
[G]
[F]
[I]
[C]
S
o
rt
e
r
S
ta
p
le
r
6 March 1992
INSTALLATION PROCEDURE
31
Summary of Contents for ST23
Page 1: ...RICOH ST23 SERVICE MANUAL ...
