Ricoh SR4080, Field Service Manual

Page: 58 / 74

Stapling
Stapler Unit Movement
Side-to-Side
• The stapler motor [A] moves the stapler [B] from side to side. After the start key is pressed, the
stapler moves from its home position to the stapling position.
• If two-staple-position mode is selected, for the first stack the stapler moves to the rear stapling
position first, staples, moves to the front position, staples and waits at the front.
• For the second stack, the stapler staples the front corner first, then moves to the rear corner and
staples.
• For continuous stapling jobs, the corners are stapled rear then front for the odd number stacks and
stapled front then rear for even number stacks.
• After the job is completed, the stapler returns to its home position. This is detected by the stapler HP
sensor [C].
Rotation (1)
In the oblique staple position mode, the stapler rotation motor [A] rotates the stapler units [B] 45? to
counterclockwise after it moves to the stapling position.
2. Detailed Descriptions
56