3-34
Confidential
Fig. 3-29
<How to identify the type of Laser unit and the position of the laser serial number label>
Fig. 3-30
Assembling Note:
• Fold the Laser unit flat cable at the positions described below.
Assembling Note:
• After the replacement, refer to
“3. IF YOU REPLACE THE LASER UNIT” in Chapter 4
to enter the adjusted value of the Laser unit.
Assembling Note:
• Attach the laser serial number label as shown in the figure above (on the Scanner
plate) after replacing the Laser unit.
45°
<Main
PCB side>
71±1
108±1
234±5
Mountain fold
Valley fold
<Laser
unit side>
Electrode
Electrode
Laser serial number label
Laser unit
Scanner plate
Scanner plate
