Ricoh SH-P1 Series Training Download Page 66

Page: 66 / 116

SH-P1 Training

Slide 66

Achieving 50 CPM

with Mono-component Toner

New toner

New toner was developed to improve fusibility and development
at higher speed. (Toner is modified based on Midas/Per' toner.)

The silica component of the toner is decreased compared to the
Midas/Per' toner.

Merits:

–

reduces metering blade wear

–

extends the life of the development roller

Demerit:

–

The margin for smudged image is decreased. (However, there
is no problem on actual usage.)

Development roller

Uses a larger circumference development roller

Dual charge rollers

To ensure the sufficient charging for the life of AIO, the SH-
MF1/P1 machines use two charge rollers. (In high speed
machines, there is a possibility that charge rollers become dirty.)

No additional notes.

Summary of Contents for SH-P1 Series





















































































































Search results

Summary of Contents for SH-P1 Series

Reviews:

Related manuals for SH-P1 Series

Brands by name

Popular brands

Ricoh SH-P1 Series, Training

Search results

Summary of Contents for SH-P1 Series

Reviews:

Related manuals for SH-P1 Series

Brands by name

Popular brands