background image

5

Note the following handling precautions for tote bags:

• 

Do not machine wash tote bags. Doing so may cause the tote bag to lose 

• 

its shape or cause its colors to fade.

When washing tote bags by hand, dissolve some neutral detergent in 

• 

lukewarm water of about 30°C (86°F) and wash them without rubbing 
their printed areas. After washing a tote bag, shake it out to remove as 
much water as possible. Then, flatten it to remove wrinkles and dry it in 
the shade.

Laws and Regulations

User Information on Electrical & Electronic 
Equipment 

Users in the countries where this symbol shown in this section has been 
specified in national law on collection and treatment of E-waste 

Our Products contain high quality components and are designed to facilitate 
recycling.

Our products or product packaging are marked with the symbol below.

The symbol indicates that the product must not be treated as municipal waste. It 
must be disposed of separately via the appropriate return and collection systems 
available. By following these instructions you ensure that this product is treated 
correctly and help to reduce potential impacts on the environment and human 
health, which could otherwise result from inappropriate handling. Recycling of 
products helps to conserve natural resources and protect the environment.

For more detailed information on collection and recycling systems for this product, 
please contact the shop where you purchased it, your local dealer or sales/service 
representatives.

All Other Users

If you wish to discard this product, please contact your local authorities, the shop 
where you bought this product, your local dealer or sales/service representatives.

Summary of Contents for Rh 100



























Reviews:

Related manuals for Rh 100