manualshive.com logo in svg

Ricoh Rh 100, Operating Instructions Manual

The Ricoh Rh 100 Quick Manual is a comprehensive user guide for this high-performance device. Find all the essential information you need to maximize its features and functionality. Download this manual for free at manualshive.com, ensuring you have all the necessary instructions at your disposal.

Share
Download
background image

20

  Close the front cover.

DSA139

  Slide the mode switching lever 

to the right.

The remaining time is displayed on 
the time/temperature indicator.

DSA141

  Processing is completed and an 

alarm sounds.

  Slide the mode switching lever 

to the center and confirm that 
the mode indicator turns off.

DSA136

  Press the [Stop/Unlock] key for 

1  second  or  more  to  open  the 
front cover.

Because the inside of the finisher 
is very hot, do not touch anything 
inside the finisher.

DSA146

  Take out the cassette.

Remove the cassette, and then 
close the front cover. If you leave 
it open more than 10 seconds, an 
alarm sounds to warn you of risks 
such as injury or burns.

Summary of Contents for Rh 100



























Reviews:

No comments

Related manuals for Rh 100

Brands by name

Popular brands

Load more brands