Ricoh Remote Communication Gate S, Operator'S Manual, Page: 92 / 134

Configuring the Details of the Registered Information
76
7
Groups Items Descriptions Admin
Regis-
trant
Maintenance
Port IP address An IP address for the LAN1 port. If
you cannot use 192.168.10.1 for the
LAN1 port in your environment, it is
possible to change it to 192.168.1.1 or
192.168.250.1.
†
❍
MAC address A MAC address for the LAN1 port. † †
Subnet mask A subnet mask for the LAN1 port. † †
LAN Port
LAN type
*1
Select Wired or Wireless when using
the optional Wireless LAN board.
❍ ❍
DHCP Select “Enable” for the environment
using the DHCP server.
❍ ❍
IP address An IP address for the equipment
(LAN2 port). If “Enable” is selected
for the DHCP, an IP address which
the DHCP server assigned will be
shown.
❍ ❍
MAC address A MAC address of the equipment
(LAN2 port).
† †
Subnet mask A subnet mask for the equipment. If
“Enable” is selected for the DHCP, a
subnet mask which the DHCP server
assigned will be shown.
❍ ❍
Default gateway
address A gateway address for the equip-
ment. If “Enable” is selected for the
DHCP, an IP address which the
DHCP server assigned will be shown.
❍ ❍
Ethernet speed Select the Ethernet speed for the
equipment's LAN2 port.
❍ ❍
Wireless LAN
*1
MAC address
*1 The MAC address of the wireless
LAN card.
† †
SSID
*1
Enter SSID for wireless LANs within
30 characters.
❍ ❍
Transmission
speed
*1
Select the communication speed of
wireless LANs from among Auto Se-
lect, 1 Mbps Only, 2 Mbps Only, 5.5
Mbps Only and 11 Mbps Only.
❍ ❍
WEP (encryption)
*1
Select “Enable” to encrypt the com-
munication data.
❍ ❍
WEP key
*1
A encryption key when you set “En-
able” for WEP (encryption).
If you use 40 bit data (64 bit WEP),
enter 5 characters or 10 digits as a
hexadecimal number. Enter 13 char-
acters or 26 digits as a hexadecimal
number for 128 bit WEP.
❍ ❍