manualshive.com logo in svg

Ricoh Remote Communication Gate S, Operator'S Manual, Page: 2 / 134

Share
Download
Ricoh Remote Communication Gate S Operator'S Manual Download Page 2

Introduction

This manual contains detailed instructions and notes on the operation and use of this equipment. For
your safety and benefit, read this manual carefully before using the equipment. Keep this manual in a
handy place for quick reference.

Important

Contents of this manual are subject to change without prior notice. In no event will the company be li-
able for direct, indirect, special, incidental, or consequential damages as a result of handling or oper-
ating the equipment.

Caution

Certain options might not be available in some countries. For details, please contact your local dealer.

Some illustrations in this manual might be slightly different from the equipment.

The supplier shall not be responsible for any damage or expense that might result from the use of parts
other than genuine parts from the supplier with your office products. 

Power Source

120V, 60Hz, 10A or more

Please be sure to connect the power cord to a power source as above.

Trademarks

MS, Microsoft, and Windows are registered trademarks of Microsoft Corporation.

Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all rights to those marks.

The proper name of the Windows operating systems are as follows:

•

The product names of Windows

®

 2000 are as follows:

Microsoft

®

 Windows

®

 2000 Professional

Microsoft

®

 Windows

®

 2000 Server

Microsoft

®

 Windows

®

 2000 Advanced Server

•

The product names of Windows

®

 XP are as follows:

Microsoft

®

 Windows

®

 XP Home Edition

Microsoft

®

 Windows

®

 XP Professional

•

The product names of Windows Server™ 2003 are as follows:
Microsoft

®

 Windows Server™ 2003 Standard Edition

Microsoft

®

 Windows Server™ 2003 Enterprise Edition

Microsoft

®

 Windows Server™ 2003 Web Edition

•

The product names of Windows

®

 NT 4.0 are as follows:

Microsoft

®

 Windows NT

®

 Workstation 4.0

Microsoft

®

 Windows NT

®

 Server 4.0

Summary of Contents for Remote Communication Gate S







































































































































Reviews:

No comments