Ricoh RDC-7 Operation Manual Download

Page: 45 / 128

Shooting

2048

1536

Approx. 1.12 MB/image Approx. 568 KB/image Approx. 280 KB/image

1024

768

Approx. 376 KB/image

Approx. 184 KB/image Approx. 88 KB/image

640

480

Approx. 152 KB/image

Approx. 72 KB/image

Approx. 40 KB/image

2048 1536 E

Selecting an Image Quality Mode

The camera offers nine image quality modes. Select the mode best suited to
your photographic needs.
•

: 2048

1536 (F), 2048

1536 (N), 2048

1536 (E)

•

: 1024

768 (F), 1024

768 (N), 1024

768 (E)

•

: 640

480 (F), 640

480 (N), 640

480 (E)

• The recordable picture count varies as you switch the image quality mode.
• The factory default setting is

Press the

button and select an

image quality mode.

The image quality mode changes each time

you press the

button.

The selected image quality mode will be
displayed.

If the keep settings function is enabled, the
mode in effect when the camera is turned off
will be saved.

●

Data Guide

Note

• Image sizes are 2048

1536 pixels, 1024

768 pixels and 640

480

pixels. With this product and in this manual, the number of pixels is
shown as

and

• For the number of recordable images by image quality mode, see

“Recording Capabilities”

→

(p.122).

• Higher image quality can be obtained at 3072

2304, etc.

“Switching to PRO Mode”

→

(p.70).

Fine

Normal

Economy

Image Quality

(Compression

Rate)

Size (No.
of Pixels)

Summary of Contents for RDC-7

































































































































Search results

Summary of Contents for RDC-7

Reviews:

Related manuals for RDC-7

Brands by name

Popular brands

Ricoh RDC-7, Operation Manual

Search results

Summary of Contents for RDC-7

Reviews:

Related manuals for RDC-7

Brands by name

Popular brands