Ricoh RDC-7 Operation Manual Download

Page: 52 / 128

15:32

START/STOP
:RELEASE

Sound Recording (Sound Mode)

In this mode sound can be recorded. The recordable time is displayed
according to the available capacity in the recording destination.

Important

Note

• The microphone is located on the front of the camera. Adjust the

direction of the microphone to the best position for recording.

Set the mode dial to [

The recordable time is displayed.

Press the shutter release button to
record.

Recording will start. The

mark blinks

during recording and the recordable time is
displayed.

To cancel recording, press the shutter
release button again.

Note

When the recording/recordable time exceeds 100 minutes, the first
digit of the seconds is not displayed on the LCD monitor or LCD panel.

Continuous Shooting (Continuous Shooting Mode)

This mode is for shooting a subject continuously while the shutter button is
depressed. This function is ideal for capturing special events.

Set the mode dial to [

Press the shutter release button to
shoot the image.

Shooting continues while the shutter release
button is pressed.
Continuous shooting stops when you release
the shutter release button.

Note

• The flash does not fire in continuous shooting mode.
• In continuous shooting mode, the focus, exposure compensation and

white balance are locked in the status in effect when you press the
shutter release button.

• Continuous shooting stops when the total number of files recorded

reaches RIMG9999. In this case, format the SmartMedia memory card
or internal memory to resume continuous shooting.

Summary of Contents for RDC-7

































































































































Search results

Summary of Contents for RDC-7

Reviews:

Related manuals for RDC-7

Brands by name

Popular brands

Ricoh RDC-7, Operation Manual

Search results

Summary of Contents for RDC-7

Reviews:

Related manuals for RDC-7

Brands by name

Popular brands