Ricoh Pro 5210S, Operating Instructions Manual, Page: 147 / 164

Setting Items Max. Value Min. Value Step Unit
[Fusing Nip Width: Envelope:
Decompression: L Temp] 5 1 1 -
061: [Accumulate Heat Before Feeding Envelope]
Specify the time to wait for heat to accumulate before printing on an envelope.
If fusing errors occur on an envelope, press [+] to increase the waiting time to reduce fusing errors.
Pressing [-] will decrease the accumulation time, but fusing errors may occur.
Setting Items Max. Value Min. Value Step Unit
[Accumulate Heat Before Feeding
Envelope] 500 0 1 sec
062: [Smoothing Roller Auto Execute Setting]
Specify the frequency of automatic fusing refresh.
• [Automatic Execution]: Automatic fusing refresh is performed once per 4.5 kp.
• [Auto Execute: Frequently]: Automatic fusing refresh is performed once per 2.25 kp.
Setting Items Values
[Smoothing Roller Auto Execute Setting] [Do not Execute Automatically]
[Automatic Execution]
[Auto Execute: Frequently]
063: [Smoothing Roller Paper Type Ratio]
Specifies the frequency of automatic fusing refresh.
With the three different levels of frequency available in 062: [Smoothing Roller Auto Execute Setting],
this setting allows you to specify the frequency in greater detail.
Press [+] to increase the number of sheets to be fed before automatic fusing refresh is performed (or
decrease the frequency of automatic fusing refresh), and press [-] to decrease the number of sheets to be
fed before automatic fusing refresh is performed (or increase the frequency of automatic fusing refresh).
Example:
• When [Smoothing Roller Auto Execute Setting] = [Do not Execute Automatically] and [Smoothing
Roller Paper Type Ratio] = 100,
Setting Values
145