Ricoh Pro 5210S, Operating Instructions Manual, Page: 139 / 164

Setting Items Max. Value Min. Value Step Unit
[Ppr Trns CV Control Duration: FC: Side 1] 100 0 1 ms
044: [Ppr Trns CV: Duration: FC: Side 2]
Adjust the duration of constant voltage control for the bias on Side 2 during paper transfer when printing
in full color.
Press [+] or [−] to adjust the duration.
Setting Items Max. Value Min. Value Step Unit
[Ppr Trns CV: Duration: FC: Side 2] 100 0 1 ms
045: [Ppr Trns Contact Mode]
Specify a mode of secondary transfer paper contact/separation.
• High speed mode: Turns on full secondary transfer paper contact/separation mode.
• Low pressure mode: Prints with reduced secondary transfer nip pressure.
• Middle speed mode: Turns on secondary transfer paper contact/separation mode with the
secondary transfer separation speed decreased to 85% of that of the high speed mode.
• Low speed mode: Turns on secondary transfer paper contact/separation mode with the secondary
transfer separation speed decreased to 40% of that of the high speed mode.
• Low speed for all paper type mode: Turns on secondary transfer paper contact/separation mode
with the secondary transfer separation speed decreased to 40% of that of the high speed mode
and with the print speed set to low.
• Off: Maintains contact state with no paper contact/separation.
Use this setting to reduce shock jitters that may occur with thick paper.
This setting helps to reduce shock jitters*1 by reducing shocks that may be caused when the trailing
edge of the paper passes through the secondary transfer unit. The greatest jitter reduction effect is
obtained in the high speed mode, followed by the middle speed mode, and then the low speed mode.
If the image density is lowered at the edge when the low speed mode is used, select the low speed for
all paper type mode.
Setting Values
137