Ricoh Pro 5210S, Operating Instructions Manual, Page: 136 / 164

Specify the paper transfer currents as a percentage of the currents specified in 026: [Paper Transfer
Current: FC: Side 1] and 027: [Paper Transfer Current: FC: Side 2].
Use this to reduce image quality degradation at the trailing edge of the paper.
Press [+] to increase the percentage and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Paper Transfer Current: TE: FC] 300 5 1 %
025: [Paper Transfer Current: TE Length: BW]
Adjust the area at the trailing edge of the paper for application of paper transfer current.
Specify the length of area at the trailing edge of the paper to which the current set in 024: [Paper
Transfer Current: TE: BW] is applied.
Use this to reduce image quality degradation at the trailing edge of the paper.
Press [+] to increase the length of area at the trailing edge to apply the current and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Paper Transfer Current: TE Length: BW] 100 0 1 mm
031: [Paper Transfer Current: TE Length: FC]
Adjust the area at the leading edge of the paper for application of paper transfer current.
Specify the length of area at the trailing edge of the paper to which the current set in 030: [Paper
Transfer Current: TE: FC] is applied.
Use this to reduce image quality degradation at the trailing edge of the paper.
Press [+] to increase the length of area at the trailing edge to apply the current and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Paper Transfer Current: TE Length: FC] 100 0 1 mm
037: [Ppr Trns CV: Start Timing: BW: Side 1]
Adjust the timing to start constant voltage control for the bias on Side 1 during paper transfer when
printing in black-and-white mode.
Use this to adjust transferability at the leading edge of the paper.
Press [+] or [−] to adjust the start timing.
4. Details of Menu Items in Advanced Settings
134