Ricoh Priport JP5000 Operating Instructions Manual Download Page 218

Page: 218 / 232

REMARKS

196

Maintaining Your Machine

To maintain high print quality, clean
the following parts and units regular-
ly.

Important

❒

Do not use benzine, thinner, or
other organic liquids. Otherwise,
this machine might be damaged.

Main Frame

Exposure glass (contact glass)

Lift the platen cover or document
feeder.

Clean the exposure glass (contact
glass) with a damp cloth and wipe
it with a dry cloth.

Note

❒

If you do not clean the exposure
glass (contact glass), marks on
the glass will be printed.

Platen Cover

Lift the platen cover.

Clean the platen cover with a
damp cloth and wipe it with a dry
cloth.

Note

❒

If you do not clean the platen
cover, marks on the cover will
be printed.

Paper feed roller (paper feed tray)

Wipe off the paper dust on the pa-
per feed roller with a damp cloth,
then wipe it with a dry cloth.

Note

❒

If you do not clean the paper
feed roller, paper misfeeds tend
to occur.

TPEH390E

AM1P0100

TPEH120E

Summary of Contents for Priport JP5000








































































































































































































































Search results

Summary of Contents for Priport JP5000

Reviews:

Ricoh Priport JP5000, Operating Instructions Manual, Page: 218 / 232

Search results

Summary of Contents for Priport JP5000

Reviews: