Ricoh Priport JP5000 Operating Instructions Manual Download Page 146

Page: 146 / 232

OPTIONAL FUNCTIONS

124

Memory Combine—Combining Originals
Into One Print With The Memory Board

You can combine originals in four ways:

❖

4 One-sided Originals

→

1 One-sided Print Of 4 Images

4 one-sided pages are printed onto 1 one-sided sheet, 4 original images on one
side.

❖

8 One-sided Originals

→

1 One-sided Print Of 8 Images

8 one-sided pages are printed onto 1 one-sided sheet, 8 original images on one
side.

❖

16 One-sided Originals

→

1 One-sided Print Of 16 Images

16 one-sided pages are printed onto 1 one-sided sheet, 16 original images on
one side.

❖

Repeating An Image Over The Entire Print

1 original image is printed repeatedly.

Limitation

❒

The optional memory board is required.

Note

❒

A separation Line between images can be printed with the user tools. See
“Comb. Sep. Line” in

⇒

P.139

“4. Mode Setting”

Summary of Contents for Priport JP5000








































































































































































































































Search results

Summary of Contents for Priport JP5000

Reviews:

Ricoh Priport JP5000, Operating Instructions Manual, Page: 146 / 232

Search results

Summary of Contents for Priport JP5000

Reviews: