44
English
User Settings
Setup
Language
The language used in the On-Screen Menu is available in English,
Germany, French, Italian, Spanish, Portuguese, Polish, Dutch,
Russian, Swedish, Greek,
Traditional Chinese,
Simplified Chinese,
Japanese, Korean, and Turkish.
Boot-up Source
Set the projector’s boot-up source between “Auto”, “Computer”,
“HDMI/MHL”, and “Media”.
Direct Power On
When enabled, the projector will automatically power on when
AC power is supplied, without pressing the “Power” button on
the projector control panel or on the remote control.
Sleep Timer
Set the countdown timer interval between “0:30”, “1:00”, “3:00”,
“8:00”, “12:00”, “Auto”, or “Off”. The countdown timer will start,
with or without a signal being sent to the projector. The projector
will automatically power off when the countdown has finished.
Advanced
Go to “Advanced” sub menu.
If the “Boot-Up
Source” is set to“Auto”
then at each boot-up of
the projector, the input
source (COMPUTER,
HDMI, or Media) is
always chosen the same
as in previous session.
Note
If the “Sleep Timer”
is set to“Auto” then
the project will
automatically power
off after 15 minutes if
the projector has not
detected any signal
from COMPUTER or
HDMI source.
Note
Setup
English
Language
Boot-up Source
Direct Power On
Select
Exit
Enter
Sleep Timer
Advanced
Reset
Software Ver.
Auto
Off
Security
