Ricoh PJ WX4153N, Operating Instructions Manual

Page: 121 / 176

Display Status
Input
Displays the selected input signals.
Resolution
Displays the resolution.
This item appears when you select [Computer] or [HDMI] (RGB signals) as the input signal.
Frequency
Displays the synchronous frequency.
This item appears when you select [Computer] or [HDMI] (RGB signals) as the input signal.
Sync
Displays the synchronous signal polarity.
This item appears when you select [Computer] as the input signal.
Signal Format
Displays the Y/Pb/Pr signal format.
This item appears when you select [Y/Pb/Pr] or [HDMI] (Y/Pb/Pr signals) as the input signal.
Lamp Time
Displays the lamp usage time.
Lamp Reset Count
Displays the number of lamp replacements.
Total Time
Displays the projector usage time.
Total CO2 Reduction
Displays the total reduction in CO
2
caused by setting the lamp to the eco mode.
Eco Time Ratio
Displays the ratio of the time eco mode was used to the total use time.
Current Time
Displays the current time specified in [Current Time] in [Default Settings 2].
Main FW Version
Displays the version of the firmware on the main board.
Display Status
119