Ricoh PJ S2130 User Manual Download

Page: 52 / 54

English

Appendices

Trademarks

• DLP is trademarks of Texas Instruments.

• IBM is a trademark or registered trademark of International

Business Machines Corporation.

• Macintosh, Mac OS X, iMac, and PowerBook are trademarks

of Apple Inc., registered in the U.S. and other countries.

• Microsoft, Windows, Windows Vista, Internet Explorer and

PowerPoint are either a registered trademark or trademark

of Microsoft Corporation in the United States and/or other

countries.

• MicroSaver is a registered trademark of Kensington Com

puter Products Group, a division of ACCO Brands.

• HDMI, the HDMI Logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI
Licensing LLC.

• Other product and company names mentioned in this user’s

manual may be the trademarks or registered trademarks of
their respective holders.

Summary of Contents for PJ S2130























































Search results

Summary of Contents for PJ S2130

Reviews:

Related manuals for PJ S2130

Brands by name

Popular brands

Ricoh PJ S2130, User Manual

Search results

Summary of Contents for PJ S2130

Reviews:

Related manuals for PJ S2130

Brands by name

Popular brands