Ricoh PJ S2130, User Manual

Page: 23 / 54

22
English
Installation
Powering On the Projector
1. Ensure that the power cord and signal cable are securely
connected. The Power indicator will turn red.
2. Remove the lens cap.

3. Turn on the lamp by pressing “Power” on the control panel
or the remote control.

The Power indicator will flash blue.
The startup screen will display in approximately 5 seconds.
After the screen disappears, the Power indicator will turn
blue.
The first time you use the projector after purchase, the lan -
guage menu is displayed after the startup screen.
(See pages 34~35)
4. Turn on your source (computer, notebook, video player,
etc.) The projector will detect your source automatically.
Powering On/Off the Projector

Turn on the projector
first and then the signal
sources.
Note
Lens Cap
Status
Enter
Computer1
Computer2
Video
Menu AV Mute
Freeze
Keystone
Picture
Aspect
Eco
Volume
Power
S-Video
HDMI
Input
AutoSet
Magnify
Status
Enter
Computer1
Computer2
Video
Menu AVMute
Freeze
Keystone
Picture
Aspect
Eco
Volume
S-Video
HDMI
Input
AutoSet
Magnify
Power
1
2
OR
CAUTION:
• Do not look into the lens while the lamp is on. The strong light from the lamp may
cause damage to your eyesight.
• Do not block the air intake or exhaust. Doing so could cause a fire due to internal
overheating.
• Do not place your hands, face, or other objects near the air exhaust, the lamp cover
or the bottom of the unit. Doing so could result in injury and/or damage the object.
• Do not block the light from projection lens by anything when you want to stop
projection. Doing so could cause a fire due to heating by strong light. Please use
“AV Mute” function for this purpose.

If you connect
multiple sources at
the same time, use the
“Input” on the remote
control or use “Com-
puter 1”, “Video”,
“S-Video”, “HDMI” on
the remote control to
switch inputs.
Note