Ricoh PJ KU600, Field Service Manual

Page: 53 / 110

4. Remove the lens shift dial [A] and bracket [B]. ( ×2)
5. Remove the lens [A]. ( ×3)
Blower Unit (Including Thermistor and Interlock Switch)
1. Remove the lamp cover and lamp module. ( page 24 "Lamp Cover, Lamp Module" )
2. Remove the top cover. ( page 26 "Top Cover (Including Mini HDMI Cable and Keypad
Rubber)" )
3. Remove the main board. ( page 34 "Main Board (Including HDBaseT Board (WUXGA
model only) and Sub Board)" )
4. Remove the shielding bracket. ( page 40 "Shielding Bracket with Rear Cover and LVPS" )
5. Remove the color wheel module. ( page 30 "Color Wheel Module (Including Photo Sensor
and Color Wheel)" )
6. Remove the optical system unit. ( page 48 "Optical System Unit (Including Focus Ring,
Zoom Lever, Lens Shift Dial, Lens)" )
7. Remove the lamp housing. ( page 46 "Lamp Housing" )
8. Remove the lamp cable. ( page 47 "Lamp Cable" )
Part Replacement
51