19
English
Introduction
Connecting terminals
RICOH PJ X4340
5
1
10
2
3
4
6
9
8
7
10
2
3
8
7
(1) <HDMI In>
This is a terminal to connect to HDMI signal.
(2) <Monitor Out>
This is a terminal to output the RGB signal
or component signal via <Computer 1 In> or
<Computer 2 In> terminal.
(3) <Computer 1 In>
This is a terminal to input the RGB signal or
component signal.
(4) <Video In>
This is a terminal to input the video signal.
(5) <Audio 2 In>
This is a terminal to input the audio signal
from the video equipment connected to the
<Video In> terminal.
(6) <Audio 1 In>
This is a terminal to input the audio signal
from the computer connected to the <Com-
puter 1 In> or <Computer 2 In> terminal.
(7) <PC Control>
This is a RS-232C compatible terminal to
externally control the projector.
(8) <Computer 2 In>
This is a terminal to input the RGB signal or
component signal.
(9) <Audio out>
This is a terminal to output the audio signal
input to the projector. The output level can
be adjusted.
(10) Service terminal
Note
When the <HDMI IN> terminal is connected to
y
a computer via a HDMI-DVI conversion cable,
it can only input video signal and the analog
audio signal can not be input.
RICOH PJ RX300
