Ricoh PJ HDC5420, User Manual

Page: 27 / 69

English
25
English
Introduction
5 Eco Dim the projector lamp which will
lower power consumption and extend
the lamp life.
6 MHL Control Press “MHL Control” to control your
MHL device.
7 Number (0~9) Input numbers.
8 /- Increase/decrease speaker volume.
9 Video Press “Video” to choose Video in
terminal.
10 HDMI Press “HDMI” to choose HDMI1/
MHL in and HDMI2 in terminal.
11 Magnify Zoom in the projector display.
12 S-Video Press “S-Video” to choose S-Video in
terminal.
13 Freeze Pause the screen image. Press again to
resume the screen image.
14 Aspect Use this function to choose your
desired aspect ratio.
15 DisplayPort This key is not available on this
machine..
16 Computer Press “Computer” to choose
Computer in terminal.
17 Ke/- Adjust the image to compensate
for distortion caused by tilting the
projector.
18 Picture Select the preset picture mode.
19 Auto Set Automatically synchronize the
projector to the input source.
20 Input Press “Input” to choose your desired
input source.
21 Menu Press “Menu” to launch the On Screen
Display (OSD), back to the top level
of OSD for the OSD main menu
operation. (See page 37)
22 Power Refer to the “Power On/Off the
Projector” section. (See pages 30 ~ 31)