Ricoh PB3040 Installation Manual Download Page 2

Page: 2 / 4

For 2000-sheet paper feed unit:

Turn the printer off and unplug
the power cord.

Remove the packaging from the
paper feed unit.

Pull out the handle from the right
side of the printer.

Lift the printer using the handles
on both sides.

The printer should always be lifted
by at least four people.

Align the front of the printer with
the front of the paper feed unit,
and slowly lower it.

Place it so that it is held firmly in
place by the vertical pins.

Return the handle you pulled out
from the printer to its original po-
sition.

BEK500S

BEK011S

BEJ126S

BEJ124S

AlexP1_pera_pfu-GB-F1_FM_forPaper.book Page 2 Thursday, April 24, 2008 5:34 PM

Summary of Contents for PB3040

Page 1: ...or service representative Before using the new paper feed unit you must configure settings in the printer driver A Check the contents of the package For 1000 sheet paper feed unit For service personne...

Page 2: ...dles on both sides The printer should always be lifted by at least four people F Align the front of the printer with the front of the paper feed unit and slowly lower it Place it so that it is held fi...

Page 3: ...rrectly Note To confirm whether the optional paper feed unit was correctly at tached print the configuration page and check Attached Equip ment on the configuration page If the unit was attached corre...