G112/G113/G116 Product Support Guide
V2.0
9/1/2006
Page 18 of 19
Service Information:
Firmware Structure
Service Programs to Note
Branding:
Ricoh version machines: No branding necessary.
Savin/Gestetner/Lanier: You must adhere the model label (provided) to the front cover and set the Plug
and Play name with SP 5-907 (SP available to technician only).
Model
Firmware Type
G112
Controller, 3 PCMCIA Cards required
G112
Controller 1, Platform & Rescue
G112
Controller 2, Printer
G112
Controller 3, Web Support & Network
G112
Engine, 1 PCMCIA card required
G113, G116
System, SD Card
G113, G116
Printer, SD Card
G113, G116
Websys, SD Card
G113, G116
NCS, SD Card
G113, G116
Netfile, SD Card
G113, G116
Font, SD Card
G113, G116
Engine, SD Card
G113 G116
DESS, SD Card
SP Mode
Description
Note
SP 5-907
Plug and Play
Savin/Gestetner/Lanier Branding. Requires
selection at install.
SP 5-104
A3/DLT Double Count (G116 only)
No / Yes
SP 5-810
Fusing Error Clear
Turn main power OFF/ON after SP.
SP 5-930
Meter Charge Mode
Enabled:
•
“Replace Maintenance Kit” not
displayed. Technician replaces
maintenance kit items.
•
The meter charge counter is displayed
immediately after the Menu key is
pressed.
•
Technician must reset PM counter after
finishing PM.
Disabled:
•
“Replace Maintenance Kit” is displayed
on the operation panel when the PM
counter runs out. The user replaces
the maintenance kit items.
•
The meter charge counter is not
displayed after the Menu key is
pressed.
•
The PM counter resets automatically
after the user replaces the fusing unit.
