Ricoh NIB 450-E, Owner'S Manual

Page: 90 / 120

NetWare
®
Configuration
6
2
A
Double-click on the target NIB.
The first “Print Server Settings” screen appears.
Most of the fields will be configured automatically.
Fill in the following fields with the appropriate information.
❖
❖ ❖
❖
Print Server Name
The name that the NIB uses to log into NetWare.
❖ ❖ ❖ ❖
Print Queue Scan Rate
The number of seconds the NIB waits before polling print queues for a new
print job.
❖
❖ ❖
❖
Ethernet Frame Type
Sets the default frame type that is used by the NetWare protocol stack.
❖ ❖ ❖ ❖
Print Server Password
Asterisks in this field indicate that a password is needed to log into Net-
Ware and the Network Interface Board.
❖ ❖ ❖ ❖
Change Password
Clicking on this button brings up a dialog box allowing you to set or
change the password.
B
Click on
[Next]
to continue.
The second “Print Server Settings” screen appears.
Again, most of the fields will be configured automatically.
Fill in the following fields with the appropriate information.
❖
❖ ❖
❖
Enable NDS Mode
Indicates whether or not the NIB supports Directory Services.
❖ ❖ ❖ ❖
Preferred NDS Context
The NDS directory context which the NIB uses to login to the network.
❖
❖ ❖
❖
Preferred NDS Tree
The NDS tree which the NIB uses to login to the network.
❖ ❖ ❖ ❖
Enable Bindery Mode
Determines whether the NIB services the network in Bindery mode.
Note
❒
If this field is not enabled, then the Primary Server field will not be en-
abled.
❖ ❖ ❖ ❖
Primary File Server
Specifies the file server that the NIB uses as the primary file server.