Ricoh LP031c, Option Setup Manual

Page: 30 / 40

Options
26
1
B
Press the
{{{{
# Enter
}}}}
key.
The following message appears
on the panel display.
Note
❒
The value in brackets at the
upper right is the number of
characters entered.
C
Press the
{{{{U
U U
U}}}}
or
{{{{T
T T
T}}}}
key to se-
lect characters, and then press
the
{{{{
# Enter
}}}}
key.
You can now enter the next
character.
D
Continue entering the key.
Note
❒
The characters that can be
used are ASCII 0x20-0x7e (32
bytes).
❒
To display the previous char-
acter, press the
{{{{
Escape
}}}}
key.
E
After entering the key, press
the
{{{{
# Enter
}}}}
key twice.
The screen returns to step
K
-
A
.
LLLL
In the case of using a WEP key on
a network, activate the WEP set-
ting to be used for communica-
tion along with WEP.
Note
❒
Confirm the network adminis-
trator for the WEP Key to use.
❒
WEP key can also be set using a
web browser. For details, see
Web Image Monitor Help.
A
Press the
{{{{U
U U
U}}}}
or
{{{{T
T T
T}}}}
key to dis-
play “WEP Setting”.
B
Press the
{{{{
# Enter
}}}}
key.
C
Press the
{{{{U U U U}}}}
or
{{{{T T T T}}}}
key to dis-
play “Active”, and then press
the
{{{{
# Enter
}}}}
key.
The following message appears
on the panel display.
Note
❒
When setting the WEP Set-
ting to “Active”, you will
need to enter the WEP key. If
you have not entered the key,
be sure to enter it.
❒
If you have entered the WEP
key and change the setting,
press the
{{{{U
U U
U}}}}
or
{{{{T
T T
T}}}}
key to
display “No”, and then press
the
{{{{
# Enter
}}}}
key.
SSID:
SSID:
A
SSID:
A
SSID:
AAAAAAAAAAAAAAAA
IEEE 802.11b:
WEP Setting
WEP Setting:
*Not Active
WEP Setting:
Active
Change WEP Key:
Yes (HEX)
PlutoP1EN_setup-F_FM_ZF.book Page 26 Monday, March 1, 2004 6:36 PM