Ricoh LP031c, Option Setup Manual

Page: 24 / 40

Options
20
1
DDDD
Fasten the hard disk drive using
the screws
When the power is turned on, the
hard disk drive will be formatted
automatically.
Important
❒
Before using the new hard disk
drive, you must make the set-
tings in the printer driver.
Note
❒
After finishing installation, you
can check whether the hard disk
drive is installed properly. Print
the configuration page from the
“List/Test Print” menu. If it is
installed properly, you will see
“Printer Hard Disk Drive” for
“Controller Option”.
❒
If the hard disk drive is not in-
stalled properly, reinstall it
from step
A
. If you cannot install
it properly even after attempting
reinstallation, contact your sales
or service representative.
Reference
For printing the configuration
page, see “Printing a Configura-
tion Page”,
Administrator Refer-
ence .
AAL141S
PlutoP1EN_setup-F_FM_ZF.book Page 20 Monday, March 1, 2004 6:36 PM