Ricoh LF312 Basic Features Download

Page: 21 / 92

1. Getting Started

Guide to Components

Front View

ADF Cover

Cover for the document feeder (ADF).

Release Button

Push this button to open the document
feeder.

Document Feeder (ADF)

Originals will be fed automatically.

Output Tray

Received fax messages and copies are
stacked here.

Control Panel

Operate the machine using keys and
watching the display on the Control Pan-
el.

Front Cover

Open this cover when changing the toner
cassette and the photo conductor unit in-
side the machine.

Main Paper Tray

Load paper here.

Paper Tray Unit (Option)

You can load more paper here.

Lower Right Cover

Open this cover to remove jammed paper
fed from the optional paper tray unit.

10.

Bypass Tray

A fax message can be printed, and the
original is copied on the paper placed
here.

11.

Right Cover

Open this cover to remove jammed paper
fed from the paper tray.

12.

Original Output Tray

Scanned originals are stacked here.

AZW004

StellaF16_combine_F-EN.book Page 15 Tuesday, July 1, 2008 11:47 AM

Summary of Contents for LF312





























































































Search results

Summary of Contents for LF312

Reviews:

Related manuals for LF312

Brands by name

Popular brands

Ricoh LF312, Basic Features

Search results

Summary of Contents for LF312

Reviews:

Related manuals for LF312

Brands by name

Popular brands