Ricoh JP3000, Service Manual, Page: 610 / 693

SP TABLE (SP 2-XXX)
C267 5-4 SM
5.3 BASIC SETTINGS
5.3.1 SP TABLE (SP 2-XXX)
No. Menu Items Default Settings
1 Default print speed 2 1 to 3
2 Default image position 0 -10.0mm to +10.0mm (0.5mm
interval)
4 Destination code
5 Not used (Ink) 0 0 / 2-
6 Image position display 1 0:Slow 1:Normal 2:Fast
10 Ink detection board On Off/On (Off is used for tests, and
for removing ink from the drum)
11 Paper end sensor On Off/On (Off is used for tests)
12 Drum master sensor On Off/On (Off is used for tests)
13 Platen cover sensor On Off/On (Off is used for tests)
14 ADF cover sensor On Off/On (Off is used for tests)
20 Destination setting Other Other/Japan
21 Ink setting (not used) 0 0 to 1
33 Re - Feeding setting On Off/On
40 T/H energy control – B4/Black 7 0 to 50%
41 T/H energy control – B4/Color 7 0 to 50%
42 T/H energy control – A4/Black 7 0 to 50%
43 T/H energy control – A4/Color 7 0 to 50%
44 T/H energy control – LG/Black 7 0 to 50%
45 T/H energy control – LG Color 7 0 to 50%
50 T/H energy control - B4/Black eco 15 0 to 50%
51 T/H energy control - B4/Color eco 15 0 to 50%
52 T/H energy control - A4/Black eco 15 0 to 50%
53 T/H energy control - A4/Color eco 15 0 to 50%
54 T/H energy control – LG/Black eco 15 0 to 50%
55 T/H energy control – LG/Color eco 15 0 to 50%
60 Bold letter mode Off Off/On
61 T/H Swing Mode Off Off/On
62 T/H Swing Quantity 2 +-1mm to +-5mm
80 Auto off at unusual voltage On Off/On
95 Paper table standby position Low High / Low
100 Make master without print Off Off/On