Ricoh InfoPrint 1892, User Manual

Page: 82 / 96

C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in the tray:
1
From the printer control panel, check the Paper Type setting from the Paper menu.
2
Before sending the job to print, specify the correct type setting:
•
For Windows users, specify the type from Print Properties.
•
For Macintosh users, specify the type from the Print dialog.
T
HE PRINT CARTRIDGE MAY BE DEFECTIVE
Replace the print cartridge.
Print is too light
These are possible solutions. Try one or more of the following:
C
HECK THE DARKNESS
,
BRIGHTNESS
,
AND CONTRAST SETTINGS
The Toner Darkness setting is too light, the Brightness setting is too light, or the Contrast setting is too low.
•
From the printer control panel, change these settings from the Quality menu.
•
For Windows users, change these settings from Print Properties.
•
For Macintosh users, change these settings from the Print dialog and pop-up menus.
T
HE PAPER HAS ABSORBED MOISTURE DUE TO HIGH HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
C
HECK THE PAPER
Avoid textured paper with rough finishes.
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in the tray:
1
From the printer control panel, check the Paper Type setting from the Paper menu.
2
Before sending the job to print, specify the correct type setting:
•
For Windows users, specify the type from Print Properties.
•
For Macintosh users, specify the type from the Print dialog.
Troubleshooting
80