Ricoh HL-F1, Field Service Manual

Page: 189 / 296

In models with OGM facilities, the settings made by these selectors also apply to the length of time
from CML-ON up to the start of OGM transmission.
WSW25 (TAD setting 3)
Selector No. Function Setting and Specifications
1 to 4 Not used. -
5 to 7 Pause between paging number and PIN
No. 5 6 7
0 0 0 : 2 sec.
0 0 1 : 4 sec.
0 1 0 : 6 sec.
0 1 1 : 8 sec.
1 0 0 : 10 sec.
1 0 1 : 12 sec.
1 1 0 : 14 sec.
1 1 1 : 16 sec.
8 Not used. -
• Selectors 5 through 7 are applicable to the U.S.A. models only.
• Selectors 5 through 7: Pause between paging number and PIN
These selectors set the pause time between a telephone number being paged and PIN (personal
identification number) for the paging feature.
WSW26 (Function setting 4)
Selector No. Function Setting and Specifications
1
2
Not used. -
3
Dialing during document reading into the
temporary memory in in-memory message
transmission
0: Disable 1: Enable
Firmware Switches (WSW)
187
5