Ricoh Hadar-PJ1 Series, Field Service Manual

Page: 108 / 114

2. Select “Internet protocol (TCP/IP)”, and then click “Properties”.
3. Modify the IP address to 192.168.0.101, and modify the subnet mask to 255.255.255.0.
The subnet mask of the PC must be the same as the projector.
The HOST ID or IP address (192.168.0.XXX) of the PC must be different from the projector IP
address written down earlier.
4. Click “OK”.
5. Click "Close" to quit the setting screen.
Network firmware update procedure
1. Execute "Internet Explorer".
2. Visit "http:// 192.168.0.100/firmwareUpdate.htm".
6. Update
106