background image

2

2-3

E-820 on a TCP/IP network with Windows NT 4.0/2000/XP

For Windows NT 4.0/2000/XP, install the appropriate printer driver files on the 
Windows NT 4.0/2000 server.

For more information, see the

 User Software Installation Guide

.

Repeat the installation for all users who print to the E-820.

Each server and workstation running the Fiery utilities with TCP/IP also needs the 
TCP/IP protocol and the Fiery utility software.

Configuring a Windows NT 4.0/2000 server to communicate with 
the E-820

To configure a Windows NT 4.0/2000 server to communicate with the E-820, follow 
these general steps. More detail is provided in subsequent sections in this chapter and 
in your Microsoft documentation.

• Load the TCP/IP network protocol on the server and configure it with an 

IP address, subnet mask, and gateway.

• Enter the host name of the E-820 in the host database used by your system (see 

page 2-4

).

• Perform E-820 Setup.

• On the Windows NT 4.0/2000 server, create a printer for each E-820 print 

connection, install the appropriate printer drivers, and (optionally) share the printer 
on the network (see 

page 2-5

).

• Enter the host name and remote printer name of the E-820 in the printer 

connection. For more information, see 

page 2-18

.

• If the Windows NT 4.0/2000 server is also a workstation, install Fiery utilities (see 

the 

User Software Installation Guide

).

Summary of Contents for Fiery E-820































































































































































































Reviews: