BIT SWITCHES
31 March, 1997
4-14
BIT SWITCH 6
Bit
Function
Comments
0
to
5
Not used
Do not change the factory settings.
6
Limit Rx
0: Disabled
1: Enabled
Same as the Function 47 (Limit Rx) setting.
If enabled, the machine does the following:
NSF/NSS mode:
Checks whether the ID codes at both ends are identical
or not.
DIS/DCS mode:
Compares the ID code and remote fax machine's last 4
digits in the TSI frame
7
Communication time
selection
0: Phase C only
1: Phase B-C-D-E
This bit determines the start point of counting the
communication time.
BIT SWITCH 7
Bit
Function
Comments
0
TTI page number
0: Included
1: Not included
Same as the Function 46 setting.
1
Dialing method
0: DTMF dialing
1: Pulse dialing
Same as the Function 47 (Line Select) setting.
2
Not used
3
Dial mode priority
0: Speed dial
1: Keypad dial
0:
“QUICK: KEYPAD”
is displayed for transmission.
1:
“DIAL KEYPAD”
is displayed for transmission.
4
Not used
Do not change the setting.
5
6
Receive mode home position (same as the function 47 setting)
0
0
1
0
0
1
1
1
=
=
=
=
Fax Mode
Tel Mode
Auto Mode
TAD Mode
,
,
,
7
Buzzer On/Off
0: On
1: Off
Turns the buzzer on and off.
