BIT SWITCHES
31 March, 1997
4-12
BIT SWITCH 4
Bit
Function
Comments
0
Not used
1
RTI and CSI
programming function
0: Enabled
1: Disabled
1: Function 24 (RTI) and 26 (CSI) are not accessible.
When Czech Rep. or Hungary is selected, this bit is
automatically set to “1”, so that the users cannot
program the RTI and CSI by themselves (PTT
requirement).
To program the RTI and CSI, change this bit to “0”,
program them, then change this bit back to “1”.
2
Monitor speaker during
communication
0: Up to phase B
1: All the time
0: The monitor speaker is on up to the following point.
TX - before DCS
RX - after DIS
1: Used for testing. The monitor speaker is on all
through the communication.
Be sure to reset this bit after test communications.
3
Automatic new polling
file list printout
0: Enabled
1: Disabled
Same as the Function 48 (New Poll Report) setting.
4
Automatic new file list
printout
0: Enabled
1: Disabled
Same as the Function 48 (New File Report) setting.
5
Automatic Tx report
printout
0: Enabled
1: Disabled
Same as the Function 48 (Tx Report) setting.
6
TCR data after printout
0: Keep
1: Delete
1: Communication records for TCR are deleted after the
TCR is printed.
7
Automatic TCR printout
0: Automatic
1: Disabled
Same as the Function 48 (TCR Report) setting.
0: The TCR is printed automatically after every 35
communications.
1: The TCR is not printed automatically. The oldest
communication record will be overwritten.
