Ricoh D023, Service Manual, Page: 1272 / 1522

Paper Output
D372 38 SM
When the actuator attached to the mobile fence cam switches the feed-out belt HP sensor
[12] ON, this stops the feed-out belt motor with the pawls at their home positions.
Bottom Fences
There are three bottom fences. A mobile fence (1) resides between two stationary bottom
fences (2) and (3). When the mobile fence (1) is at its home position, the positioning roller
and return rollers feed the trailing edge of each sheet against these fences.
When the stack is ready to be moved to the output tray, the mobile fence (6) pushes the
stack to the right. The rear pawl (4) and front pawl (5), mounted on the rear and front
feed-out belts, swing up from below and push the stack onto the tray. The mobile fence (6)
returns to its home position between the stationary bottom fences.
Feed-Out Mechanism: Right and Front View
1. Stapling Tray 6. Rear Feed-Out Belt Pawl
2. Mobile Fence 7. Mobile Fence HP
3. Front Feed-Out Belt 8. Mobile Fence (Forward Position)
4. Rear Feed-Out Belt 9. Feed-Out Pawls (HP)
5. Front Feed-Out Belt Pawl 10. Bottom Fences x2