Ricoh CX6 User Manual Download Page 114

Page: 114 / 172

Assigning F

unc
tions

Locking the Exposure

Assigning [AE Lock] to the Fn button (

P.110) and then pressing the

Fn button during shooting allows you to lock or cancel the exposure.

Set [Set Fn Button] to [AE Lock] on the key custom menu.

• For the operating procedure, see P.110.

With the camera ready to shoot, position subject in the

center of the picture display and press the Fn button.

• The exposure is locked and the AEL

mark, aperture value, and shutter

speed appear on the screen.

• Pressing the Fn button again cancels

the AE lock.

Note -------------------------------------------------------------------------------------

• The AE lock function cannot be used during shooting movies.

Summary of Contents for CX6













































































































































































Search results

Summary of Contents for CX6

Reviews:

Related manuals for CX6

Brands by name

Popular brands

Ricoh CX6, User Manual

Search results

Summary of Contents for CX6

Reviews:

Related manuals for CX6

Brands by name

Popular brands