132
9
D
o
wnloading Images t
o Y
our C
omput
er
Caution ---------------------------------------------------------------------------------
• Do not turn off the camera or disconnect the USB cable during image transfer.
• You can also click [Eject] on the [File] menu to cancel the connection.
• If the USB cable is disconnected without disabling the connection, the Unsafe
Removal of Device screen may be displayed. Be sure to stop the connection
before removing the USB cable.
• When you connect your camera to a Macintosh computer, a file called “FINDER.
DAT” or “.DS_Store” may be created in your SD memory card, which will appear
as [Unmatched File] on your camera. You can delete this file from the SD
memory card if you wish.
Using the MP File Viewer
When you shoot one still image with M-Cont Plus, Speed Cont, or
Multi-trgt AF, the image is recorded as one MP file.
By using the VM-1 MP file viewer, you can play back MP files on your
Macintosh computer and export still images.
This section explains how to install and uninstall the VM-1 software.
For details on how to play back MP files on your computer or export
still images from MP files using the MP file viewer, see the “Software
User Guide” (PDF file).
Installing Software
Caution ---------------------------------------------------------------------------------
Before proceeding, confirm that [Mass Storage] is selected for [USB Connection
Type] (
G
P.113) in the setup menu (
G
P.109).
1
Turn the camera power off, and pull the SD memory card
out of the camera.
•
With SD memory card in the camera, the software cannot be
installed.
