Ricoh CX5 User Manual Download Page 122

Page: 122 / 161

121

Dir
ec

t Printing

Note

-------------------------------------------------------------------------------------

• To specify the settings as the default settings

next time the camera is connected to the
printer, press the MENU button when the
screen in Step 3 is displayed. Select [Yes] in
the display at right and press the ADJ./OK
button.

• To use the settings last set the next time the

camera is connected to the printer, select [No].

Select an option and press the ADJ./OK button.

• The display returns to the Direct Print menu.
• Repeat Steps 3 and 4 to change other settings as required.

Press the ADJ./OK button.

• The selected still images are sent to the printer and the [Sending…]

screen appears.

• Pressing the DISP. button cancels the operation.
• When the images have been sent to the printer, the display returns

to the Direct Print playback mode screen and printing starts.

Summary of Contents for CX5


































































































































































Search results

Summary of Contents for CX5

Reviews:

Related manuals for CX5

Brands by name

Popular brands

Ricoh CX5, User Manual

Search results

Summary of Contents for CX5

Reviews:

Related manuals for CX5

Brands by name

Popular brands