Ricoh CX4, User Manual

Page: 27 / 144

26
If y
ou ar
e using the c
amer
a for the first time
, r
ead this sec
tion.
Setting the Language
1
Press the ADJ./OK button
!"NF
to select a language.
• When the DISP. button is pressed, the
language setting is canceled and the
date/time setting screen appears.
2
Press the ADJ./OK button.
• The display language is set, and the date/time setting screen
appears.
Setting the Date and Time
1
Press the ADJ./OK button
!"NF
to set the year, month,
date, time and format.
• Change the setting with
!"
and
move the item with
NF
.
• You can cancel the setting by pressing
the DISP. button.
2
Check the information on the screen and then press the
ADJ./OK button.
• The confirmation screen appears.
3
Press the ADJ./OK button.
• The date and time are set.
Note -------------------------------------------------------------------------------------
• The language, date, and time can be changed at any time using the [Language/
N
] and [Date Settings] items (
G
P.102) in the setup menu (
G
P.98).
• The [Date Imprint] item (
G
P.77) in the shooting menu (
G
P.71) can be used
to stamp photographs with the date and time of recording.
• If the battery is removed for more than one week, the date and time settings
will be lost. These settings must be made again.
• To retain the date and time settings, load a battery with adequate remaining
power for more than two hours.