Catalog Explorer User Manual
______________________________________________________________________________
________________________________________________________________________________
Page 16 of 36
Visit our knowledgebase at:
http://www.ricoh-usa.com/support/knowledgebase.asp
Copyright 2008 Ricoh Americas Corporation
8. Searching for Parts
8.1 Selecting the Machine Unit/Section
To search for a specific part, the first step is to specify the machine unit or section in which
this part may be located. To do this, click on one of the selections listed in the Machine
Unit/Section area, on the far left of the GUI. The specific unit/section is then displayed in
the main image area, and all parts contained within that unit/section are displayed as
thumbnails in the individual parts list.
Note: In cases where there is not enough space to display the entire machine unit/section,
place the cursor over the machine unit/section to display the tool tip.
8.2 Selecting the Search Method
With the operation described above, the scope of the search can be narrowed down to the
machine unit/section. Use the following search methods to narrow down the results to the
specific part you wish to locate.
