148
Chapter 3 / Section 2 Creating a Camera Memo List
Select the place to save the camera memo
list and enter a file name.
Make sure a mta file type (*.mta) is selected
in the [Save as type] list.
The file can be saved as a csv file. To use the file as a
camera list for the camera, a mta file type must be
selected.
Click the [Save] button.
Make sure the camera is turned off.
Load the SD memory card into the camera.
Connect the provided USB cable to the USB
port of the computer.
Open the terminal cover of the camera and
insert the USB cable plug in the USB port.
The camera is turned on. In this case, the LCD
monitor is held off but the flashing lamp and auto
focus lamp indicate that the camera power is on.
If file transfer from the camera to the computer starts
when the USB cable is connected, wait until the file
transfer ends.
Click the [TRANSFER TO CAMERA] button.
The camera memo list is saved in the SD memory
(loaded in the camera) through the USB cable and a
message appears indicating that transfer completed
successfully.
Click the [OK] button.
Click the [QUIT] button.
ListEditor closes.
You can also quit ListEditor by clicking the [x] (Close)
button in the upper-right corner of the screen.
Press the Power button of the camera to turn
off the camera.
Disconnect the USB cable between the
camera and computer.
Now, turning on the camera allows you to use the
camera memory list stored on the SD memory card.
• For how to use the [ListEditor] screen, see
p.149.
• For how to shoot a still image with a camera
memo, see p.144.
