Beluga-C1/C1.5 Training
167
Slide 167
LPH Replacement and Adjustment
Make a test print
SP 4417, pattern number 19
Insert a wide original (914 mm, 35“), at least 297
mm (11”) long, into the scanner.
The pattern will soon print automatically
LPH REPLACEMENT AND ADJUSTMENT
Printing the Test Pattern
Replacement and Adjustment, Important Adjustments, LPH
Adjustment with SP Codes
The pattern appears something like shown on the slide.
Note the faint lines one third and two thirds of the way across. These are the
joints.
These lines are typical for a perfectly adjusted LPH. It is impossible to get rid of
these faint lines.
¾
Just make sure that the customer is satisfied with a typical printout of
something that they will be using frequently (a CAD schematic or
something). Keep quiet and see if they notice anything one third and/or two
thirds of the way across.
If something is wrong with the factory settings, the lines will look dramatically
black or white, as shown in the next slide.
Summary of Contents for Beluga-C1
Page 110: ...Beluga C1 C1 5 Training 110 Slide 110 INSTALLATION Updating Firmware No additional notes ...
Page 236: ...Beluga C1 C1 5 Training 236 Slide 236 Exit Guide Open here to remove jams No additional notes ...
Page 253: ...Beluga C1 C1 5 Training 253 Slide 253 End of Course No additional notes ...
