22.
Select "My IP Address" in "Source address", and then click [Next].
23.
Select "A specific IP Address" in "Destination address", enter the printer's IP address, and
then click [Next].
24.
For the IPsec protocol type, select "Any", and then click [Next].
25.
Click [Finish].
26.
Click [OK].
27.
Select the IP filter that you have just created, and then click [Next].
28.
Select the IPsec security filter, and then click [Edit].
29.
In the "Security Methods" tab, check "Negotiate security" and then click [Add].
30.
Select "Custom" and click [Settings].
31.
When [ESP] is selected for the printer in [Security Protocol] under [IPsec Settings], select
[Data integrity and encryption (ESP)], and configure the following settings:
Set the value of [Integrity algorithm] to the same value as the [Authentication Algorithm for ESP]
specified on the printer.
Set the value of [Encryption algorithm] to the same value as the [Encryption Algorithm for ESP]
specified on the printer.
32.
When [AH] is selected for the printer in [Security Protocol] under [IPsec Settings], select
[Data and address integrity without encryption (AH)], and configure the following
settings:
Set the value of [Integrity algorithm] to the same value as the [Authentication Algorithm for AH]
specified on the printer.
Clear the [Data integrity and encryption (ESP)] check box.
33.
When [ESP&AH] is selected for the printer in [Security Protocol] under [IPsec Settings],
select [Data and address integrity without encryption (AH)], and configure the following
settings:
Set the value of [Integrity algorithm] under [Data and address integrity without encryption (AH)] to
the same value as [Authentication Algorithm for AH] specified on the printer.
Set the value of [Encryption algorithm] under [Data integrity and encryption (ESP)] to the same
value as [Encryption Algorithm for ESP] specified on the printer.
34.
In the Session key settings, select "Generate a new key every", and enter the same
validity period (in seconds or Kbytes) as that specified for [Life Time] on the printer.
35.
Click [OK] three times.
36.
Click [Next].
37.
Click [Finish].
If you are using IPv6 under Windows Vista or a newer version of Windows, you must repeat this
procedure from step 13 and specify ICMPv6 as an exception. When you reach step 24, select
10. Appendix
132
10
Summary of Contents for Aficio SP C242DN
