Ricoh Aficio SP C231, Service Manual, Page: 233 / 247

User's Guide 8-16 PCRIP-EZ1
I. On the final screen, you can print a Win95 test page to verify printer connection. Click on Finish to
complete the driver installation.
To print:
Follow the standard print sequence within the Windows 95 program being used. Make certain to select the
printer driver that matches the Priport Model connected to the PCRIP-EZ1 Controller. GDI printing as
described by the computer industry is "WYSIWYG"--"what you see is what you get". In other words,
however the document is displayed on the screen is how the document will print. For example, if you
compose a document using the Ricoh VT1800 driver (300 dpi), for example, and then change to the Ricoh
VT3800 driver (400 dpi), the page displayed on the screen WILL be reformatted due to a variation in font
metrics at the different resolutions. The document will print as currently displayed on the screen. If you
change the print driver back to the Ricoh VT1800, the display will change again and subsequent printed
output will match the screen.
Special note for Model VT3600 and VT3800 who use the Short Drum: Choose the standard Letter or
A4 page size instead of Ltr (SD) or A4 (SD) page size in the page setup of your application software. If the
paper is loaded correctly for the Short Drum (wide edge feed), the Priport's page size sensing will tell the
Controller to rotate the image correctly to match the paper.
Special note for Model VT3500 who use the Short Drum: You must first use the Configuration Program
to select the Letter - Short Drum or A4 - Short Drum page size in the PCRIP-EZ1. Then choose the
standard Letter or A4 page size instead of Ltr (SD) or A4 (SD) in the page setup of your application
software. Make certain that the paper is loaded correctly for the Short Drum (wide paper edge feed) and the
Controller will rotate the image correctly to match the paper.